Jotun Conseal Touch-up is a one component physically drying acrylic coating. It has a matte finish. It is a high build product. It is quick drying. It can be used directly on the metal. To be used as a top layer in atmospheric environments. It can be applied at temperatures below zero surface area.
typical use
Protective
Recommended for refineries, power stations, bridges and buildings. Suitable for a wide range of industrial plants.
Colors
According to color card and Multicolor color system Industry (MCI).
Check out the colors and corresponding color codes
application methods
spray
If airless spray is used the paint must be diluted 5-10%.
Brush
Use a suitable brush. Care must be to achieve the specified dry film thickness.
roller
Can be used but is not recommended for first coat on bare metal. Care must be to achieve the specified dry film thickness.
Thinner / Cleaning agent
Dilution: Jotun Thinner No. 7
Drying and curing time at 15 degrees
Dust dry: 15 minutes
Foot traffic drying time: 10 hours
Recoat: 2.5 hours
Article number | J224 |
---|---|
Manufacturer | Jotun |
Write Your Own Review